6 Piece Walnut Slatwall Panel Set - HDSW24X6-BW

Does this come in a shorter length than 48”?

We can cut the individual rails to your dimensions. We charge $5 per cut. You will need to call in to order this directly as we don’t offer that service through website orders. Also, we cut the rails when they are “raw” and then powder coat afterwards, so there will not be an exposed edge.

Can these rails be cut around outlets, light switches, etc.?

The rails are made from aluminum and are able to be “crosscut” fairly easily with a chop saw and good quality metal cutting blade. However, more intricate cuts like outlet and light switch openings are more difficult and will require user skill and good quality equipment.

Can these rails be attached to a concrete wall?

Yes, but we supply attachment hardware for normal wood stud wall applications. So you will need to purchase your own hardware to attach to a concrete wall. It also takes some skill to line up the holes that you drill into the aluminum rails with the holes that you pre-drill into the concrete; especially if you are covering a large area. In a lot of situations, it’s easier to stud the concrete wall so you can attach the rails to the studs.

Are there holes pre-drilled into the rails for the screws?

We do not pre-drill holes into the rails. You will need to drill holes into the rails wherever it matches up properly with your wall studs.