SKU:
HDSW2

Strong Wall – Aluminum Slatwall Rail -HDSW2

$26.99 - $73.99
Selected Slatwall Finish is
Adding to cart… The item has been added
Ships in 1-2 business days from Ontario, WI

Does this come in any other lengths?

We can cut the individual rails to your dimensions. We charge $5 per cut. You will need to call in to order this directly as we don’t offer that service through website orders. Also, we cut the rails when they are “raw” and then powder coat afterwards, so there will not be an exposed edge.

Can these rails be cut around outlets, light switches, etc.?

The rails are made from aluminum and are able to be “crosscut” fairly easily with a chop saw and good quality metal cutting blade. However, more intricate cuts like outlet and light switch openings are more difficult and will require user skill and good quality equipment.

Can these rails be attached to a concrete wall?

Yes, but we supply attachment hardware for normal wood stud wall applications. So you will need to purchase your own hardware to attach to a concrete wall. It also takes some skill to line up the holes that you drill into the aluminum rails with the holes that you pre-drill into the concrete; especially if you are covering a large area. In a lot of situations, it’s easier to stud the concrete wall so you can attach the rails to the studs.

Are there holes pre-drilled into the rails for the screws?

We do not pre-drill holes into the rails. You will need to drill holes into the rails wherever it matches up properly with your wall studs.

The 4 foot rails are made of extruded aluminum, which is the highest strength slatwall available on the market today! Sold in 4-foot lengths & available in a durable black vein, silver vein, copper vein, white vein and walnut vein powder coat finish. Stack them vertically to make a wall, connect them horizontally to make a long strip, or space them out to make the ultimate gun room.

Click here to see the 2 foot sections:

https://www.holdupdisplays.com/strong-wall-aluminum-slatwall-rail-2-foot-section-hdsw22/?

Is your space smaller than 4 feet wide? We can custom cut rails to any size for $5 per rail. Please call us at 866-443-6623 for custom cuts.

*A joiner piece is included, which allows you to connect end to end as many slatwall rails as you would like, creating 8 ft, 10 ft,12 ft,14 ft, 16 ft, etc., section of rail.

*This rail is designed for 3, 4 or 6 in. slatwall fixtures.

*Mounting hardware is included for wall stud installation.  Must be secured to a minimum of 3 wall studs!

Specifications:

slatwall-rail-specs.jpg


  • The HDSW24 is complete with tongue-and-groove tabs and can be stacked seamlessly... resulting in a slatwall sheet effect.image-1.jpg

 


 

All Stock Numbers

HDSW24-B, HDSW24-C, HDSW24-S, HDSW24-W, HDSW24-BW

  • Width:
    51.00 Inches
  • Height:
    6.00 Inches
  • Depth:
    0.50 Inches