6 Piece Walnut Slatwall Panel Set - HDSW2-3x4 - Wood Pattern

Does this come in a shorter length than 48”?

We can cut the individual rails to your dimensions. You will need to call in to order this directly as we don’t offer that service through website orders. Also, we cut the rails when they are “raw” and then powder coat afterwards, so there will not be an exposed edge. Please contact us for more information and pricing.

Can these rails be cut around outlets, light switches, etc.?

The rails are made from aluminum and are able to be “crosscut” fairly easily with a chop saw and good quality metal cutting blade. However, more intricate cuts like outlet and light switch openings are more difficult and will require user skill and good quality equipment.

Can these rails be attached to a concrete wall?

Yes. Many of our customers go this route. Below are two common ways to do this, otherwise feel free to give us a call for questions with installation 1-866-443-6623:

1. Our recommended and easiest option is to fur out your concrete walls with studs, then you can secure your gun wall with the screws provided. Here's a video showing that process: Click To See Video . We recommend going 16" on center with screws in both channels of each slatwall rail.

2. You can mount directly to the cinder block or concrete wall, but you will need to purchase concrete screws. We've found that using a pan head 3/16" x 1-1/4" concrete screw works best. Here is an option that works well: Amazon Link

Can my gun wall be a different height or width?

Yes, the size of our gun walls are customizable to fit your specific space. You can design your own using our gun wall builder or contact our team and we will design your wall for free: 1-866-443-6623 or contact@holdupdisplays.com

1. Width: Our standard website offering allows you to customize your width in 1-foot increments. We do offer custom cuts for more precise widths. Please give us a call (1-866-443-6623) if this is something you are interested in.

2. Height: Customizable in 6-inch increments. 6-inch increments is the only option as we are unable to cut the height of our rails.