Conditions of Use

Hold Up Displays is not responsible for the following:

  • The method in which the purchaser attaches the firearm or archery hanger to the wall
  • The strength of the wall material the hanger is placed on

Mounting Instructions

Choose location for your hanger. Drive screws through mounting holes of hanger into the wall, using a Phillips screwdriver. If a wall stud is not found, these pilot holes are necessary for installing the plastic toggles. To do this, use the screwdriver to push and turn the toggle clockwise until flush. Remount hanger with screws into plastic toggles.

Please DO NOT REUSE TOGGLES for remounting or putting a screw in a second time. If you need to replace your toggles, you may pick them up at your local hardware store.

The standard opening of the yoke on our units will accommodate most firearms and compound bows. However, if you need to widen the yoke width, grasp each arm of the yoke and pull them apart. If you need to narrow the yoke width, place your hand around the yoke arms and squeeze them together.